HoMedics HUM-WM75 Cool & Warm Mist Ultrasonic Humidifier, How To Use, Power Knob

Models: HUM-WM75

1 14
Download 14 pages 3.26 Kb
Page 4
Image 4
Cool & Warm Mist Ultrasonic Humidifier

Cool & Warm Mist Ultrasonic Humidifier

Oscillating ON/OFF Button

Warm/Cool Mist Button

Oscillating Head & Nozzle

Mist Decrease

Button

Warm/Cool Mist Indicator Light Ring Power Knob

HEAT COOL

Mist Increase

Button

Power ON/OFF Button

Fig.2

Control Panel

HEAT COOL

Fig.1

Power Knob

Plug unit in to a 120 volt AC electrical outlet. Push the POWER ON/OFF (Mist Increase and Decrease) button to turn unit on.

ATTENTION: When the water in the tank is almost empty, the power will shut off to indicate to the user to refill water.

Mist Increase and Decrease

There are 7 different levels of mist output from Lowest to Highest. To increase the mist output, press the MIST INCREASE ( ) button until the desired mist output is reached. When the maximum mist output has been reached, the indicator ring light will blink once and will blink each time the MIST INCREASE button is pressed.

To decrease mist, press the MIST DECREASE (Warm and Cool Mist Control) button until the mist has decreased to the output level desired. When the minimum mist output level has been reached, the indicator ring light will blink once and will blink each time the MIST DECREASE button is pressed. (Fig.2)

Warm and Cool Mist Control

How To Use

CAUTION: This appliance has a polarized plug (one blade wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.

DO NOT attempt to defeat this safety feature. To do so could result in an electric shock hazard.

The humidifier is equipped with the option to select warm or cool mist. Each time the unit is turned on it will start producing cool mist. The Warm/Cool mist indicator ring will glow with a blue light. To select Warm Mist, press the WARM/COOL MIST button. When warm mist is selected, the mist indicator ring will change from blue to red and warm mist will start being produced. To return to cool mist, press the WARM/COOL MIST button again. The mist indicator ring will change from red to blue. (Fig.2)

6

7

Page 4
Image 4
HoMedics HUM-WM75 Cool & Warm Mist Ultrasonic Humidifier, How To Use, Power Knob, Mist Increase and Decrease