HoMedics JS-200P instruction manual Special Warnings, Grounding Instructions

Caution:

All servicing of this footbath must be performed

by authorized HoMedics service personnel only.

Caution:

To avoid injury and irreparable damage, always remain seated when using footbath.

Never stand on or in the unit.

SPECIAL WARNINGS

•DO NOT reach for an appliance that has fallen into water. Unplug it immediately.

•DO NOT use while bathing or showering. Use only in a dry area.

•DO NOT place or store appliance where it can fall or be pulled into a tub or sink. DO NOT place in or drop into water or other liquid.

•DO NOT attempt to plug or unplug unit while feet are in the water.

•Use appliance on a sturdy or level surface.

•If you have any concerns regarding your health, consult your doctor before using your HoMedics footbath.

•Consult your doctor before using in case of illness or medical condition, including but not limited to pacemaker use and pregnancy.

•We recommend using this unit for no longer than 30 minutes at a time. Extensive use could cause the product to overheat. Should this occur, discontinue use and allow the unit to cool before operating.

•If you experience pain in a muscle or joint for a prolonged period of time, discontinue use and consult your doctor. Persistent pain could be a symptom of a more serious condi- tion.

•NEVER use any footbath on open wounds, discolored areas, or any area of the body that is swollen, burned, inflamed or where skin eruptions or sores are present.

•Use of this product should be pleasant and comfortable. Should pain or discomfort result, discontinue use and consult your physician.

•NEVER use while sleeping or drowsy.

•Always unplug the unit when filling or moving the unit.

•Ensure that your hands are dry when operating the controls or removing the plug.

•This product should NEVER be used by any individual suffering from any ailments that would limit the user’s capacity to operate the controls.

Grounding Pin

Figure A

Tab for

Adapter Grounding Screw

Figure B

Grounded

Outlet

Figure C

Metal Screw

Figure D

Figure E

•This product should NEVER be used by any individual suffering from any ailments that would limit or altogether inhibit the user’s capacity to feel or have any sensation in the body part that the product is being used for.

Grounding Instructions

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for the electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-ground- ing conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER

Improper connection of the equipment-grounding con- ductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, you may temporarily use an adaptor (such as the one shown in Figure B) until you have a proper outlet (such as the one shown in Figure C) installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in Figure A. A temporary adapter that looks like the adapter illustrated in Figure B may be used to connect this plug to a 2-pole receptacle as shown in Figure D if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet Figure C can be installed by a qualified electrician. The tab for grounding screw Figure B extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw. See Figures D and E.

4 5