HoMedics PS-250 Grounding Instructions, Perfect Steam Features, Assembly Instructions

Grounding Pin

Figure A

Tab for

Adapter Grounding Screw

Figure B

Grounded

Outlet

Figure C

Metal Screw

Figure D

Figure E

Grounding Instructions

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for the electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, you may temporarily use an adapter (such as the one shown in Figure

B)until you have a proper outlet (such as the one shown in Figure C) installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in Figure A.

A temporary adapter that looks like the adapter illustrated in Figure B may be used to connect this plug to a 2-pole receptacle as shown in Figure D if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet Figure C can be installed by a qualified electrician. The tab for grounding screw Figure B extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw. See Figures D and E.

Pole

Turn

Figure 1

Hanger

Attachment

Clips

Figure 2

Fabric

Brush

Figure 3

Turn

Figure 4

Crease

Clamp

Nozzle

Tab

Figure 5

Perfect Steam Features

•Safe for use on all types of fabrics

•Quick heat-up feature emits steam in 45 seconds

•Convenient integrated garment hanger

•Telescoping design for compact storage

•5 foot flexible hose with Safe Touch® hose cover for safe and comfortable handling

•Easy-fill water tank provides 45 minutes of continuous steam

•Rolling casters for excellent mobility

•Low water auto shut-off for safe use

Assembly Instructions

1Carefully remove all contents from packaging and inspect the product to make sure all components have been received (Fig. 10).

2.Insert pole into top of unit. Match the grooves on the pole with the notches in the pole connector and push down. Securely tighten the nut on the pole over the connector by turning it clockwise (Fig 1).

3.To attach the hanger attachment, align tabs in hanger attachment with grooves on pole and push down (Fig. 2).

4.Fully extend the telescopic pole. To do so, open the 3 clips on the pole and pull the pole upwards (Fig. 2). When fully extended close the clips. Make sure that the pole is securely locked into place and cannot be pushed downward.

5.Attach the fabric brush to the nozzle by setting into place (Fig. 3).

6.Attach handle & hose assembly to unit. Line up the nut on the hose with the screw on the hose connector. Turn nut clockwise until it is securely tightened on the hose connector, (Fig 4). It should be tightly screwed into place. Then you may hang the steamer handle onto the hanger attachment (Fig. 3).

NOTE: Do not hang the hose on the hanger attachment until after it has been connected to the base to prevent the hose from falling on you.

7.Attach the crease clamp (Fig. 5) onto the nozzle tab and gently push into place.

NOTE: Do not use the crease clamp and the fabric brush at the same time

4 5