FEATURES
PRODUCT SPECIFICATIONS
Hydraulic Cylinder Pressure | .................................. 2320 psi | |
Oil Capacity | ................................................... | 3.4 qts. (3.2 l) |
Input | 120 Volt, 60 Hz, AC Only, 15 Amps | |
Log Capacity Diameter, maximum | ............................. 12 in. |
Log Capacity Diameter, minimum | 4 in. |
Log Capacity Length | 20.5 in. |
KNOW YOUR LOG SPLITTER
See Figure 2.
Before attempting to use this product, familiarize yourself with all operating features and safety rules.
BLEED SCREW
Loosen the bleed screw to ensure the smooth flow of air in and out of the oil tank.
HYDRAULIC CONTROL LEVER
Push down on the hydraulic control lever and the ram starts pushing the log into the wedge.
LIFT HANDLE
The lift handle makes rolling the log splitter from one location to another simple and easy.
RESET/OVERLOAD BUTTON
If the motor is overloaded the machine will shut off. Remove the load and push the reset/overload button to restart the machine.
OIL DRAIN BOLT WITH DIPSTICK
Oil drain bolt with dipstick makes checking and changing hydraulic oil easy.
SIDE SUPPORTS
Side supports on each side of the work table keep logs resting securely on the log splitter.
WORK TABLE
Provides surface to support log prior to splitting operation.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
WARNING:
Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.
PACKING LIST
Log Splitter
Wheel (2)
Hardware Bag
Operator’s Manual
CAUTION:
Failure to loosen the bleed screw prior to operation of this product may cause the seals in the hydraulic system to blow out. Blown seals could cause permanent damage to the log splitter.
8 — English
