MAINTENANCE

CLEANING THE EXHAUST PORT AND MUFFLER

Depending on the type of fuel used, the type and amount of lubricant used, and/or your operating conditions, the exhaust port and muffler may become blocked with carbon deposits. If you notice a power loss with your gas-powered products, you may need to remove these deposits to restore perfor- mance. We highly recommend that only qualified service technicians perform this service.

SPARK ARRESTOR

See Figure 15.

The spark arrestor must be cleaned or replaced every 50 hours or yearly to ensure proper performance of your product. Spark arrestors may be in different locations depending on the model purchased. Please contact your nearest service dealer for the location of the spark arrestor for your model.

EMPTYING FUEL TANK/CARBURETOR

To help prevent gum deposits in the fuel system, drain the fuel from the tank and carburetor before storing.

Run the generator until the fuel tank is empty.

When the fuel has gone from the tank, close the fuel valve.

NOTE: Consult hazardous waste management guidelines in your area for the proper way to dispose of used fuel.

TRANSPORTING

Turn engine switch OFF ( O ).

Turn the fuel valve to the OFF position.

Make sure engine and exhaust of unit is cool.

Empty the fuel tank.

Do not drop or strike unit or place under heavy objects.10

Page 15 — English

Page 19
Image 19
Homelite UT902250 Spark Arrestor, Emptying Fuel TANK/CARBURETOR, Transporting, Cleaning the Exhaust Port and Muffler