Homelite ZR31810 manual Assembly, Installing Grass Shield, Adjusting the Shaft

ASSEMBLY

INSTALLING GRASS SHIELD

Remove both screws on the motor housing. Orient grass shield on the motor housing and twist to lock in place as shown. Re-install screws to secure grass shield in place. See Figure 2.

GRASS

SHIELD

RE-INSTALL

BOTH SCREWS

REMOVE

BOTH

SCREWS

MOTOR

HOUSING

Fig. 2

ADJUSTING THE SHAFT

•Rotate the lower portion of the shaft adjustment collar to the “Unlock” position. See Figure 3.

•Lower shaft should now be free to slide down from inside the upper shaft. Make sure the shaft is pulled out to the desired position. See Figure 4.

SLIDE OUT TO

DESIRED POSITION	L
	NU
	KCOL

Fig. 4

•Rotate shaft adjustment collar to the “Lock” position and tighten securely. See Figure 5.

SHAFT

ADJUSTMENT

COLLAR

TO UNLOCK COLLAR

SHAFT

ADJUSTMENT

COLLAR

L

N

U

KCOL

LOWER PORTION

OF SHAFT

ADJUSTMENT

COLLAR

L

NU

KCOL

LOWER PORTION

OF SHAFT

ADJUSTMENT

COLLAR

TO

LOCK

COLLAR

Fig. 3 Fig. 5

Page 8