5. SPARTING THE EMGWIE CAUTION: To prevent damage to the outboard from overheating, never
run the engine with the propeller out of the water.
1. Connect the fuel line to the tank and outboard motor, as shown. Be sure
the connectors are securely latched.
NOTE:
l
Position the fuel tank so the tank fuel line connector is no more than .l
meter (3.3 ft) below the motor fuel line connector.
l
Do not place the fuel tank more than 2 meters (6.6 ft) away from the
mbtor.
l
Be sure that the fuel line is not kinked.
FEMALE FUEL LINE CONNECTOR
-- __----
MALE FUEL LINE CONNECTOR
-TO FUEL TANK
2. Open the fuel cap vent knob 2 to 3 turns.
3. Squeeze and release the primer bulb until it feels firm, indicating that
fuel’ has reached the motor. Check for leaks.
w Be careful not to spill any fuel when refueling. Spilled fuel or fuel
vapor may ignite. If any fuel is spilled, make sure the area is dry before
starting the engine.
NOTE: Do not use the primer bulb while the engine is running.
VENT KNOB q
BULB
13