Cleaning and Flushing
After each use in salt water or dirty water, thoroughly clean and flush the
outboard motor.
l
For safety, the propeller must be removed.
l
Be sure the outboard motor is securely mounted, and do not leave it
unattended while running.
l
Keep children and pets away from the area, and stay clear of moving
parts during this procedure.
CAUTION: Running the engine without water can cause serious engine
damage due to overheating. Be sure that water flows from the water check
tube while the.engine is running. If not, stop the engine and determine the
cause of the problem.
(With Honda flush kit-Optional part)
1. Wash the outside of the outboard motor with clean, fresh water.
2. Flush the cooling system, using the Honda flush kit (optional).
a. Attach a hose from a fresh water faucet to the flush kit hose coupler.
b. Remove the propeller, and clip the flush kit rubber fitting over the
water intake as shown.
c. Turn on the fresh water supply to the hose.
d. Start the engine and run in neutral for 10 minutes.
-I KIT
WAiER
HOSE
31