Circuit Breaker
The circuit breaker will automatically switch OFF if there is a short
circuit or a significant overload of the generator at the receptacle. If the
circuit breaker is switched OFF automatically, check that the appliance
is working properly and does not exceed the rated load capacity of the
circuit before switching the circuit breaker ON again.
The circuit breaker may be used to switch the generator power ON or
OFF.
Ground Terminal
The generator ground terminal is connected to the frame of the
generator, the metal non-current carrying parts of the generator, and
the ground terminals of each receptacle.
Before using the ground terminal, consult a qualified electrician,
electrical inspector or local agency having jurisdiction for local codes
or ordinances that apply to the intended use of the generator.
GROUND TERMINAL
Oil Alert System
The Oil Alert system is designed to prevent engine damage caused by
an insufficient amount of oil in the crankcase. Before the oil level in the
crankcase can fall below a safe limit, the Oil Alert system will
automatically stop the engine (the engine switch will remain in the ON
position).
If the engine stops and will not restart, check the engine oil level (page
24 ) before troubleshooting in other areas.
UPPER
LEVEL
\
42