Honda Power Equipment EM1800X, EM2200X, EM1600X owner manual Pre-Operationcheck

Models: EM1600X EM1800X, EM2200X

1 36
Download 36 pages 7.74 Kb
Page 8
Image 8
3. PRE-OPERATION CHECK

3. PRE-OPERATION CHECK

CAUTION: Be sure to check the generator on a level surface with the engine stopped.

1.Check the engine oil level.

CAUTION: Engine oil is a major,factor affecting engine performance and service life. Non-detergent or vegetable oils are not recommended.

Use Honda 4-stroke oil, or an equivalent high detergent, premium quality motor oil certified to meet or exceed US. automobile manufacturers’ requirements for Service Classification SE or SF. (Motor oils classified SE or SF will show this designation on the container.)

SAE low-40 is recommended for general, all-temperature use. Other viscosities shown in the chart may be used when the average temperature in your area is within the indicated range.

Remove the oil filler cap, and wipe the dipstick with a clean rag. Check the oil level by inserting the dipstick in the filler hole without screwing it in. If the oil level is below the end of the dipstick, add oil to the upper level mark on the dipstick.

NOTE: The Oil Alert System will automatically stop the engine before the oil level falls below the safe limit. However, to avoid the inconvenience of an unexpected shutdown, it is still advisable to visually inspect the oil level regularly.

UPPER LEVEL

\

LOWER LEVEL

6

Page 8
Image 8
Honda Power Equipment EM1800X, EM2200X, EM1600X owner manual Pre-Operationcheck