DC application
The DC terminals may be used for charging 12 volt
mBatteries produce explosive gases. Keep sparks, flames, and
cigarettes away. To prevent the possibility of creating a spark near the battery, connect charging cables first to the battery, then to the generator, and disconnect cables at the generator first.
CAUTION:
lDo not attempt to start an automobile engine while the generator is still
connected to the battery. The generator may be damaged.
lConnect the positive battery terminal to the positive generator terminal. Do not reverse the charging cables, or serious damage to the generator and/or battery may occur.
NOTE:
lThe DC terminals may be used while the AC power is in use.
lAn overloaded DC circuit will trip the DC circuit protector (push button
comes out). If this happens, wait a few minutes before pushing in the circuit protector to resume operation.
DC CIRCUIT BREAKER
POSITIVE TERMINAL (RED)
(BLACK)
13
