61
Wheel Kit Installation
TORQUE:
AXLE
WHEEL(2)
8 16mm FLANGE BOLT (4)
GENERATOR
SIDE
8 16mm FLANGE BOLT (4)
4.0 30mm COTTER PIN (2)
STAND(2)
20mm WASHER (2)
LONGER
8mm FLANGE NUT (4)
Install the two wheels on the axle shaft using the washers and cotter
pins.
Install the axle assembly on the generator using four 8 16 mm
flange bolts and 8 mm flange nuts.
Install the two stands on the under frame using four 8 16 mm
flange bolts.
17 22 lbf·ft (24 29 N·m , 2.4 3.0 kgf·m)
1.
2.
3.
07/11/07 10:29:44 31Z21600_062