49
SERVICING YOUR GENERATOR
AIR CLEANER SERVICE
FOAMAIR
FILTER
COVERSCREW
RUBBERSEAL
MAINTENANCECOVER
RUBBERAIR
GUIDE
AIRCLEANER
COVER
AIRCLEANER CASE
Operating the engine without an air filter or with a damagedair filterwill allow dirt to enter the engine, causing rapid engine wear. This typeof damage is not covered by the
Distributor’s Limited Warranty.
Loosen the cover screw and remove
the maintenance cover.
Press the latch tab on the top of the
air cleaner case, and removethe air
cleaner cover.
Reinstall the air filter.
Make sure that the rubberseal is set
in the groove of the air cleaner
cover.
Reinstall the air cleaner cover by
inserting the lower tab and the latch
tab.
Reinstall the maintenance cover,
and tighten the cover screw
securely.
Check the foam air filter to be sureit
is clean and in good condition. If the
foam air filter is dirty, clean it as
described on page . Replace the
foam air filter if it is damaged.
1.
2.
3.
4.
5.
6.
7.
50
10/03/11 13:01:14 31ZT3620_050