COMTROLS Engine Switch
To start and stop the engine.
Key position:
OFF: To stop the engine. Key can be removed/inserted.
ON: To run the engine after starting.
START: To start the engine by operating the starter motor.
ENGINE SWITCH
Return the key to the ON position once the engine has started. Do
not use the starter for more than 5 seconds at a time. If the engine
fails to start, release the switch and wait 10 seconds before
operating the starter again.
Circuit Breaker
The circuit breaker will automatically switch OFF if there is a short
circuit or a significant overload of the generator at the receptacle. If the
circuit breaker is switched OFF automatically, check that the appliance
is working properly and does not exceed the rated load capacity of the
circuit before switching the circuit breaker ON again.
The circuit breaker may be used to switch the generator power on or
Off.
II CIRCUIT BREAKER
/
10