SEDIMENT CUP CLEANING
1. Turn the fuel valve to the OFF
position.
2. Remove the sediment cup with a
10 mm wrench.
3. Empty the sediment cup, and
wash it in nonflammable solvent.
4. Inspect and reinstall the O-ring.
Replace the O-ring if it is
damaged.
5. Install the sediment cup, and
tighten it securely.
6.Turn the fuel valve to the ON
position, and check for leaks.
CUP
Gasoline is extremely flammable,
and gasoline vapor can explode.
Turn the fuel valve to the OFF
position after servicing the
sediment cup. Wipe up any spilled
fuel.
MAIN CLUTCH CABLE
ADJUSTMENT
Correct main clutch cable adjust-
ment is important for tiller perfor-
mance and drive belt service life.
Misadjustment can cause drive belt
slippage with resultant loss of pow-
er and premature belt wear.
1. Measure free play at the top of the
lever.
Free play should be:
3/16-3/8 in (5.0-10.0 mm)
2. If adjustment is necessary, loosen
the lock nuts with a 12 mm
wrench, and move the adjuster by
turning both nuts.
3.Tighten the lock nuts and recheck
free play.
MAIN CLUTCH LEVER
FREE PLAY
3116-318
in
ADJUSTER / MAIN CiUTCH
LOCK NUTS CABLE
38