TINE CLUTCH CABLE
ADJUSTMENT
1. With the tine clutch lever in the
DISENGAGE position, measure
free play at the tip of the lever.
Free play should be:
O-l/25 in (0 - 1.0 mm)
Just enough to ensure that the
cable does not remain under
tension in the DISENGAGE
position.
2. If adjustment is necessary, loosen
the lock nuts with a 12 mm
wrench, and move the adjuster by
turning both nuts.
3.Tighten the lock nuts and recheck
free play.
THROTTLE CABLE ADJUSTMENT
1. With the throttle lever in the idle
(*) position, measure free play at
the tip of the lever.
You can feel the free play, if you
loosen the throttle lever tension bolt
on top of the throttle lever housing.
Or, you can determine free play by
watching for throttle arm movement
at the carburetor.
2. If adjustment is necessary, hold
one of the cable adjusters with an
8 mm wrench, and loosen the lock
nut with a 10 mm wrench. Turn
the adjusters to obtain the correct
free play.
3.Tighten the lock nut and recheck
free play.
FREE PLAY TINE CLUTCH
O-1/25 in (O-1.0 mm) LEVER
ADJUSiER
!-A
I
FREE PLAY
3/16-3/8 in (5.0-10.0 mm)
ADJUSTERS NUT
39