Honda Power Equipment FR600, FR800

DRIVE BELT ADJUSTMENT

Correct drive belt tension is

im ortant for tiller performance and

bet service life. A slipping belt will

cause loss of power and premature

belt wear.

l.Adjust the main clutch cable

(page

2. Remove the belt cover.

3.With the main clutch lever in the

ENGAGED position, check the

distance between the upper and

lower sections of the drive belt at

the belt tensioner.

4.lf adjustment is necessary, loosen

the engine and engine stay mount-

ing bolts and move the engine

back and forth until the correct

distance is obtained.

5,After adjusting the distance,

tighten the engine and engine stay

NOTE:

Ali n the surface of the drive pulley

wit the surface of the driven pulley

when adjusting the belt tension.

6.Adiust the belt-to-belt stopper

7.To adjust, loosen th’e shopper

mounting bolt and move the

stopper up or down as necessary.

8,After adjusting the clearance,

tighten the stopper mounting bolt

securely.

9. Reinstall the belt cover.

FR600: 2.6-2.8 in (65-70 mm)

FR800: 2.0-2.2 in (52-57 mm)

ENGINE STAY

MOUNTING BOLT

After adjustment, be sure to reinstall the beltcover. Failure !o follow

this instruction may cause your clothing to be caught In movmg parts,

resulting in serious accident or injury.