Outdoor Installation

Install the generator in a area that is free of debris, bystanders, and overhead obstructions. Make sure the generator is on secure level ground so that it cannot slide or shift around. Also install the generator in a manner so that the exhaust will not be discharged in the direction of nearby homes.

The installation site must be relatively free from moisture and dust. All electrical equipment should be protected from excessive moisture. Failure to do will result in deterioration of the insulation and will result in short circuits and grounding.

Foreign materials such as dust, sand, lint and abrasive materials have a tendency to cause excessive wear to engine and alternator parts.

CAUTION

Pay close attention to ventilation when operating the generator inside tunnels and caves.The engine exhaust contains noxious elements.

Mounting

The generator should always be mounted on a flat level surface to isolate vibration of the generator when it is running. DO NOT place the generator on slopes, the possibility exists that the generator could slide.

GA-2.5H — INSTALLATION

Indoor Installation

Exhaust gases from gasoline engines are extremely poisonous. Whenever an engine is installed indoors the exhaust fumes must be vented to the outside. The engine should be installed at least two feet from any outside wall. Using an exhaust pipe which is too long or too small can cause excessive back pressure which will cause the engine to heat excessively and possibly burn the valves.

Eliminate the danger of deadly carbon monoxide gas. Remember that exhaust fumes from any gasoline engine are very poisonous if discharged in a closed room, but harmless if allowed to mix with the outside air. If the generator is installed indoors, you must make provisions for venting the engine exhaust to the outside of the building.

Generator Grounding

To guard against electrical shock and possible damage to the equipment, it is important to provide a good EARTH ground. Always use the ground terminal on the generator to ground the generator.

Article 250 (Grounding) of the National Electrical Code (NEC) provides guide lines for proper grounding and specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

NEC articles 250-64(b) and 250-66 set the following grounding requirements:

1.Use one of the following wire types to connect the generator to earth ground.

a.Copper - 10 AWG (5.3 mm2) or larger.

b.Aluminum - 8 AWG (8.4 mm2) or larger.

2.When grounding the generator (Figure 3) connect the ground cable between the lock washer and the nut on the generator and tighten the nut fully.Connect the other end of the ground cable to earth ground.

3.NEC article 250-52(c) specifies that the earth ground rod should be buried a minimum of 8 ft. into the ground.

GA-2.5H A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #4 (10/07/05) — PAGE 19

Page 18 Page 20
Page 19
Image 19
Honda Power Equipment GA-2.5H Installation, Outdoor Installation, Mounting, Indoor Installation, Generator Grounding
Page 18 Page 20

GA-2.5H specifications

The Honda Power Equipment GA-2.5H is a versatile and efficient generator designed to provide reliable power for a variety of applications. This portable unit is engineered with advanced technologies that make it both user-friendly and robust, making it ideal for camping trips, outdoor events, and emergency situations.

One of the standout features of the GA-2.5H is its fuel efficiency. Powered by a durable Honda engine, this generator operates with minimal fuel consumption, making it an economical choice for those needing consistent power without breaking the bank. The engine is designed for longevity, ensuring that users can rely on the generator for years to come.

The GA-2.5H boasts a maximum output of 2500 watts, providing ample power for running lights, small appliances, and various tools. The generator is equipped with a highly dependable inverter technology that delivers clean, stable electricity. This feature is particularly important for sensitive electronic devices that require a stable power supply to function properly. With a total harmonic distortion (THD) rating of less than 3%, users can be confident that their devices will not be harmed during operation.

Portability is another essential aspect of the GA-2.5H. It is designed with a lightweight frame, making it easy to carry and transport. The generator is complemented by a built-in handle, allowing for straightforward mobility. Additionally, its compact design ensures that it can fit conveniently in the trunk of a car or in tight storage spaces.

For safety and convenience, the GA-2.5H features a low oil shutdown system, which automatically turns off the generator if the oil level drops below a safe threshold. This protective measure helps prevent engine damage and prolongs the life of the generator. Furthermore, it includes a fuel gauge that allows users to monitor fuel levels at a glance, reducing the chances of suddenly running out of power.

The Honda GA-2.5H is not just powerful but also designed with user wind in mind. Its quiet operation is a significant advantage, generating noise levels as low as 48 dBA, which makes it suitable for use in noise-sensitive environments.

In conclusion, the Honda Power Equipment GA-2.5H is a reliable and efficient generator that excels in providing portable power solutions. Its advanced technology, impressive fuel efficiency, and user-friendly features make it a standout choice for anyone in need of dependable electrical power in various settings. Whether for leisure or emergency use, the GA-2.5H is a trusted companion that delivers performance and peace of mind.
Top Page Image Contents