Honda Power Equipment HHT35S - page 44

42
ASSEMBLY
UNPACKING
Carefully remove the trimmer and loose parts from the carton and compare the loose parts with the
inventory list below.
Tools Required (U-type handlebar only):
A 4 mm hex wrench, 8 and 17 mm sockets, 0 to 25 ft-lb torque wrench.
LOOSE PARTS
Check all loose parts against the following list. Contact your authorized Honda servicing dealer if any
of the loose parts shown are not included with your trimmer.
Ref.
No Description All Loop handle U-type handlebar Qty.
1 Owner’s Manual •1
2 Goggles •1
3 Oil bottle •1
4Single-strap shoulder
harness •1
5 Full shoulder harness •1
6Debris shield, for 30 ~ 80 tooth saw
blades only •1
7 Cover •1
8Left-hand thread lock
nut, 10 mm •1
9Saw blade,
50 tooth/10 in •1
10 Blade cover •1
1
10
2
7 8
9
4
3
Specially formulated and
blended for Honda engines.
Meets or exceeds American
Petroleum Institute SJ
standards.
100 cc / 3.4 oz
Genuine Honda Oil
10W-30
6
OWNER'S MANUAL
© 2002 American Honda Motor Co., Inc. –All Rights Reserved
Trimmer/Brush Cutter
HHT25S • HHT35S
See page 41 for instructions on
assembling your Trimmer.
5
HHT25S•HHT35S
U- TYPE HANDLEBAR