Honda Power Equipment HR195PDA I

5. PRE-OPERATION bHECK

FUEL

Fuel tank capacity: 0.26 US gal (1.0 P)

Remove the filler cap and check the fuel level. Refill the tank if the fuel level

is low. Refuel carefully to avoid overfilling or spilling fuel. There should be no

fuel in the filler neck.

B ”

Gasoline. is extremely flammable, and gasoline vapor can

explode, causing serious injury or death. Use extreme care when handling

gasoline. KEEP OUT OF REACH OF CHILDREN.

Refuel in a well-ventilated area with the engine stopped. Do not smoke or allow

flames or sparks in the area where the engine, is refueled or where gasoline

is stored; Avoid’ repeated or prolonged contact wit,h skin or breathing of vapor.

After refueling, tighten the fuel tank cap securely. If any fuel was spilled,.make

sure the area is dry before starting the engine.

FUEL TANK CAP-

FUEL

FILLER

NECK

16

Contents

Main Page B damage 1 CONTENTS 2 CONTENTS 3 1. SAFETY Read all safety instructions before operating the mower. I DO NOT START UNLESS~REAR DOOR IS CLOSED OR BAG IS IN PLACE. SAFETY INFORMATION Operator Responsibility Blade Hazards Thrown Object Hazards Fire and Burn Hazards Carbon Monoxide Poisoning Hazard IMPORTANT MESSAGE TO PARENTS Page 2. COMPONENT IDENTIFICATION D 9 \ -u., 3. CONTROLS 10 3. CONTROLS CUTTING HEIGHT ADJUSTMENT LEVERS II 4. ATTACHMENTS i GRASS BAG (standard equipment) Installation 12 Rerhval : ., 5. PRE-OPERATION CiiECK BLADE 5. PRE-OPERATION /CHECK 5. PRE-OPERATION CHECK (1 I 5. PRE-OPERATION bHECK 16 5. PRE-OPERATION CHECK 5. PRE-OPERATION bHECK 18 Page Page Page r 6. OPERATION CLEARING A FLOODED ENGINE 22 Page B m, Page HIGH ALTITUDE OPERATION 7. MOWING RECOMMENDATIONS 27 7. MOWING RECOMl/ilENDATIONS 28 7. MOWING RECOMMENDATIONS 29 8. TRANSPORTING , I, .-_ 30 I I I I I I 0 I I I I I I I I ENGINE OIL CHANGE Engine oil capacity: 0.63 US ,qt (0.6 PI FILLERLAP/ 9. MAINTENANCE : 34 I -%f/--- .m B rkn 9. MAINTENANCE : FLYWHEEL BRAKE CABLE ABJUSTMENT 1. 38 Page Page .9. -MAINTENANCE GRASS RAG CLEANING AND REPLACEMENT ,./ 41 9. MAINTENANCE 1 BLADE REMOVAL AND INS+ALLATION . . 42 Blade Removal Blade Installation Blade bolt torque: 36.2-43.4 ft-lb (5.0-6.0 kg-m) I IO. STORAGE 44 Preparation for Storage I Stored lawn clippings are a fire hazard. Always empty the grass bag after use. 10. STORAGE For storage of 1 or 2 months: For storage of more than 2 months: 10. STORAGE I B. 46 10. STORAGE 47 !. 11. TROUBLESHOOTING 48 j ENGINE ( 11. TROUBLESHOOTING GRASS CUTTING 49 GRASS BAGGING VIBRATION I 12. SPECIFICATIONS; MOWER MODELS 50 x DIMENSIONS 13. WARRANTY SERVICE Owner Satisfaction 51 Current customer service contact information: United States, Puerto Rico, and U.S. Virgin Islands: