Honda Power Equipment HR195PDA r 6. OPERATION , 22

i. I

r 6. OPERATION ’

5. When the engine warms up, move

the throttle lever away firom the

CHOKE’ position. Set the lever in

FAST ( @ 1 position for mowing,

or in SLOW ( C, ) position for

idling.

NOTE: If restarting a warm engine

in the CHOKE position, move the

throttle’ lever’away from CHOKE as

soon as the engine starts.

THROTTLE

LEVER

CLEARING ‘A FLOODED ENGINE

If the engine won’t start, after you have operated the starter several times,

the engine may be flooded with excess fuel. Use the following procedure to

clear and start a flooded engine:

1. Turn the fuel valve OFF.

2. Remove the spark plug, dry it, then reinstall it.

NOTE: Install the spark plug carefully, by hand, to avoid cross-threading.

After the spark plug is seated, tighten l/8 to l/4 turn with a.spark plug

wrench to compress the washer.

3. Turn the fuel valve ON, and move the throttle lever to FAST ( * ).

4. Operate the starter with the throttle lever in the FAST ( * ) position.

Contents

Main Page B damage 1 CONTENTS 2 CONTENTS 3 1. SAFETY Read all safety instructions before operating the mower. I DO NOT START UNLESS~REAR DOOR IS CLOSED OR BAG IS IN PLACE. SAFETY INFORMATION Operator Responsibility Blade Hazards Thrown Object Hazards Fire and Burn Hazards Carbon Monoxide Poisoning Hazard IMPORTANT MESSAGE TO PARENTS Page 2. COMPONENT IDENTIFICATION D 9 \ -u., 3. CONTROLS 10 3. CONTROLS CUTTING HEIGHT ADJUSTMENT LEVERS II 4. ATTACHMENTS i GRASS BAG (standard equipment) Installation 12 Rerhval : ., 5. PRE-OPERATION CiiECK BLADE 5. PRE-OPERATION /CHECK 5. PRE-OPERATION CHECK (1 I 5. PRE-OPERATION bHECK 16 5. PRE-OPERATION CHECK 5. PRE-OPERATION bHECK 18 Page Page Page r 6. OPERATION CLEARING A FLOODED ENGINE 22 Page B m, Page HIGH ALTITUDE OPERATION 7. MOWING RECOMMENDATIONS 27 7. MOWING RECOMl/ilENDATIONS 28 7. MOWING RECOMMENDATIONS 29 8. TRANSPORTING , I, .-_ 30 I I I I I I 0 I I I I I I I I ENGINE OIL CHANGE Engine oil capacity: 0.63 US ,qt (0.6 PI FILLERLAP/ 9. MAINTENANCE : 34 I -%f/--- .m B rkn 9. MAINTENANCE : FLYWHEEL BRAKE CABLE ABJUSTMENT 1. 38 Page Page .9. -MAINTENANCE GRASS RAG CLEANING AND REPLACEMENT ,./ 41 9. MAINTENANCE 1 BLADE REMOVAL AND INS+ALLATION . . 42 Blade Removal Blade Installation Blade bolt torque: 36.2-43.4 ft-lb (5.0-6.0 kg-m) I IO. STORAGE 44 Preparation for Storage I Stored lawn clippings are a fire hazard. Always empty the grass bag after use. 10. STORAGE For storage of 1 or 2 months: For storage of more than 2 months: 10. STORAGE I B. 46 10. STORAGE 47 !. 11. TROUBLESHOOTING 48 j ENGINE ( 11. TROUBLESHOOTING GRASS CUTTING 49 GRASS BAGGING VIBRATION I 12. SPECIFICATIONS; MOWER MODELS 50 x DIMENSIONS 13. WARRANTY SERVICE Owner Satisfaction 51 Current customer service contact information: United States, Puerto Rico, and U.S. Virgin Islands: