Honda Power Equipment HR195PDA rkn

9. MAINTENANCE

SPARK ARRESTER MAINTENANCE (optional equipment)

The spark arrester must be serviced every 100 hours to keep it functioning

as designed.

B

Touching the engine or exhaust system while,hot can cause

burns. Let the engine cool before servicing.

1. Remove the two nuts from the muffler shield, using a 10 mm wrench.

2. Remove the muffler shield, identification plate, muffler, and gasket.

3. Remove the spark arrester from the muffler.

4. Check for carbon deposits on the spark arrester and the exhaust port. Brush

carbon deposits away. Be careful to avoid damaging the spark arrester

screen.

5. Install the spark arrester in the muffler.

6. Install the muffler components on the engine, and tighten the two nuts

securely.

SPARK ARRESTER SPARK ARRESTER

(OPTIONAL PART) (OPTIONAL PART)

MUFFLER MUFFLER

(OPTIONAL PART) (OPTIONAL PART)

IDENTIFICATION PLATE IDENTIFICATION PLATE

(OPTIONAL PART) (OPTIONAL PART)

rkn

NUTS

SPARK ARRESTER

SCREEN

Contents

Main Page B damage 1 CONTENTS 2 CONTENTS 3 1. SAFETY Read all safety instructions before operating the mower. I DO NOT START UNLESS~REAR DOOR IS CLOSED OR BAG IS IN PLACE. SAFETY INFORMATION Operator Responsibility Blade Hazards Thrown Object Hazards Fire and Burn Hazards Carbon Monoxide Poisoning Hazard IMPORTANT MESSAGE TO PARENTS Page 2. COMPONENT IDENTIFICATION D 9 \ -u., 3. CONTROLS 10 3. CONTROLS CUTTING HEIGHT ADJUSTMENT LEVERS II 4. ATTACHMENTS i GRASS BAG (standard equipment) Installation 12 Rerhval : ., 5. PRE-OPERATION CiiECK BLADE 5. PRE-OPERATION /CHECK 5. PRE-OPERATION CHECK (1 I 5. PRE-OPERATION bHECK 16 5. PRE-OPERATION CHECK 5. PRE-OPERATION bHECK 18 Page Page Page r 6. OPERATION CLEARING A FLOODED ENGINE 22 Page B m, Page HIGH ALTITUDE OPERATION 7. MOWING RECOMMENDATIONS 27 7. MOWING RECOMl/ilENDATIONS 28 7. MOWING RECOMMENDATIONS 29 8. TRANSPORTING , I, .-_ 30 I I I I I I 0 I I I I I I I I ENGINE OIL CHANGE Engine oil capacity: 0.63 US ,qt (0.6 PI FILLERLAP/ 9. MAINTENANCE : 34 I -%f/--- .m B rkn 9. MAINTENANCE : FLYWHEEL BRAKE CABLE ABJUSTMENT 1. 38 Page Page .9. -MAINTENANCE GRASS RAG CLEANING AND REPLACEMENT ,./ 41 9. MAINTENANCE 1 BLADE REMOVAL AND INS+ALLATION . . 42 Blade Removal Blade Installation Blade bolt torque: 36.2-43.4 ft-lb (5.0-6.0 kg-m) I IO. STORAGE 44 Preparation for Storage I Stored lawn clippings are a fire hazard. Always empty the grass bag after use. 10. STORAGE For storage of 1 or 2 months: For storage of more than 2 months: 10. STORAGE I B. 46 10. STORAGE 47 !. 11. TROUBLESHOOTING 48 j ENGINE ( 11. TROUBLESHOOTING GRASS CUTTING 49 GRASS BAGGING VIBRATION I 12. SPECIFICATIONS; MOWER MODELS 50 x DIMENSIONS 13. WARRANTY SERVICE Owner Satisfaction 51 Current customer service contact information: United States, Puerto Rico, and U.S. Virgin Islands: