SPARK ARRESTER MAINTENANCE
(Optional part)
m
If the mower has been running. the muffler will be
very hot. Allow it to cool before proceeding.
1. Loosen two 6 mm nuts and remove the muffler
protector, identification plate, muffler camp and
gasket.
MUFFLER
PROTECTOR
2. Remove spark arrester from the muffler. (Taking
care not to damage the wire mesh.)
NOTE:
Check for carbon deposits around the exhaust port
and the spark arrester, and clean if necessary.
3. Install spark arrester on the muffler.
4. Install gasket, muffler camp, identification plate,
muffler protector and then tighten two 6 mm nuts
securely.
31