Adjust the skid plate and scraper positions.
m
Before adjusting the skid plate and scraper positions, be sure to
stop the engine and remove the spark plug cap from the spark plug.
The skid plate and scraper have three adjusting positions. Select the posi-
tion according to the surface conditions described in the chart.
NOTE: Adjust the height equally on both sides.
After adjusting the height, be sure to tighten the adjusting bolts and nuts
securely.
TO RAISE
HEIGHT ADJUSTING
BOLT (Track model only)
SCRAPER
Surface Conditions HEIGHT, ADJUSTING
BOLT (Track model only) Scraper Skid
Fresh snow over MIDDLE Middle Middle
even ground position position
Hard-packed snow
over even ground UPPER Upper Upper
position position
Any snow over
uneven ground LOWER Upper
position Lower
position
14