Honda Power Equipment HS724/HS928/HS1132 - page 48

46
SERVICING YOUR SNOWBLOWER
WASHER
0.028 0.031in
(0.7 0.8mm)
If installing a new spark plug, tighten 1/2 turn after the spark plug
seats to compress the washer. If reinstalling a used spark plug,
tighten 1/8 to 1/4 turn after the spark plug seats.
After the spark plug is seated, tighten with a spark plug wrench to
compress thewasher.
Make sure that the spark plug
washer is in good condition, and
thread the spark plug in by hand
to prevent cross-threading.
The spark plug must be securely tightened. An improperlytightened
spark plug can become very hot and maydamage the engine.
Measure the plug gap with a wire-
type feeler gauge. Correct as
necessary by carefully bending
thesideelectrode.
The gap should be:
0.028 0.031 in (0.7 0.8 mm)
5.
6.
7.
08/03/14 20:41:39 31767721_047