pConfiguration
The configuration switches are on the back of the thermostat. The factory settings are indicated by the gray cells in the following table.
SW1 | Early Start a | Off | On |
SW2 | Display format b | °C / | °F / |
SW3 | Cycle length c | 15 seconds | 15 minutes |
SW4 | Not used | - | - |
a.Early Start can be used in Automatic mode only. When this func- tion is enabled, the thermostat calculates the optimal time to start heating in order to obtain the desired temperature by the set time. The thermostat
b.If you change the temperature display format, the preset temperatures (
, 
and 
) will return to their default settings.
c.
qPower-up
Upon 
) and displays the actual (ambient) temperature.
nPress the Hour and Min buttons to set the thermostat’s clock. o Press the Day button to set the day.
rTemperature Setting
Setpoint
The thermostat normally displays the actual temperature. To view the setpoint, press the 
or 
button briefly. The setpoint will appear for the next 5 seconds.
To change the setpoint, press the 
or 
button until the desired temperature is displayed. To scroll faster, hold the button.
Using a preset temperature
The thermostat has 3 preset temperatures:
Comfort temperature 
Economy temperature 
Vacation temperature 
Icon | Intended use | Factory setting |
| Comfort (when at home) | 70 °F (21 °C) |
|
|
|
| Economy (when asleep or away from home) | 62 °F (16.5 °C) |
| Vacation (during prolonged absence) | 50 °F (10 °C) |
•To use the Comfort or Economy temperature, press the 
or 
button respectively. The corresponding icon will be displayed.
•To use the Vacation temperature, press both 
and 
buttons simultaneously. The 
icon will be displayed.
Storing a preset temperature
To store the Comfort or Economy temperature:
Set the desired temperature using the 
or 
button. Press and hold the appropriate button (
or 
) for approximately 3 seconds until the corresponding icon is displayed. Press the Mode button.
08060 / TH106 / TL6061
Programmable Thermostat - Installation and User Guide
To store the Vacation temperature:
Set the desired temperature using the 
or 
button. Press and hold both 
and 
buttons simultaneously for approximately 3 seconds until the 
icon is displayed. Press the Mode button.
sOperating Modes
Automatic - The temperature is set according to the programmed schedule. To place the thermostat in this mode, press Mode until 
is displayed. The icons of the current period and preset temperature are also displayed.
Temporary Bypass: If you modify the setpoint (by pressing the
, 
, 
or 
button) when the thermostat is in automatic mode, the new setpoint will be used until the end of the current period. When the next period starts, the temperature set for that period becomes the new setpoint.
Manual - The programmed schedule is not used. The temperature must be set manually. To place the thermostat in this mode:
nPress Mode until 
is displayed.
oSet the temperature using the 
, 
, 
or 
button.
tSchedule
The schedule consists of 4 periods per day which represents a typical weekday. You can program the thermostat to skip the periods that do not apply to your situation. For example, you can skip periods 2 and 3 for the weekend.
Period | Description | Associated temperature preset |
Wake
Leave
Return
Sleep
The Comfort (
) temperature is used in periods 1 and 3 and the Economy (
) temperature is used in periods 2 and 4. For example, when the period changes from 1 to 2, the setpoint automatically changes from Comfort setting (
) to Economy setting (
).
You can have a different program for each day of the week; i.e., each period can start at different time for each day of the week. The thermostat has been programmed with the following schedule.
Period Setting MO | TU | WE | TH | FR | SA | SU | |
6:00 | 6:00 | 6:00 | 6:00 | 6:00 | 6:00 | 6:00 | |
AM | AM | AM | AM | AM | AM | AM | |
8:00 | 8:00 | 8:00 | 8:00 | 8:00 | |||
AM | AM | AM | AM | AM | |||
|
| ||||||
6:00 | 6:00 | 6:00 | 6:00 | 6:00 | |||
PM | PM | PM | PM | PM | |||
|
| ||||||
10:00 | 10:00 | 10:00 | 10:00 | 10:00 | 10:00 | 10:00 | |
PM | PM | PM | PM | PM | PM | PM |
To modify the schedule:
nPress Pgm to access the programming mode. Period 1 is selected.
oPress Day to select the day to program (hold for 3 seconds to select the entire week).
pPress Hour and Min to set the start time of the selected period, or press Clear if you want to skip the period
qPress Pgm to select another period, or press Day to select another day. Then repeat step 3.