item under the “Configure” tree node in the application explorer. When one of these tree nodes is clicked, the right-hand side is loaded with the parameters' form belonging to that particular category. The Configure tree option has all the programming and configuration parameters specified for a scanner. You can set or modify these parameters as required. You can later write the modified settings to the scanner, or save them to a dcf file.

Installing EZConfig-Scanning from the Web

Note: EZConfig-Scanning requires .NET framework. If .NET is not installed on your PC, you will be prompted to install it during the EZConfig-Scanning installation.

1.Access the Honeywell web site at www.honeywellaidc.com

2.Click on the Resources tab. Select Download.

3.Click on the dropdown for Select Product Number and select the number of your product.

4.Under Tools and Utilities, click on the listing for EZConfig for Scanning.

5.Follow the security directions as prompted on the screen and click on Download.

6.When prompted, select Save, and save the file to your desktop.

7.Double click on the EZConfig-Scanningzip file.

8.Double click on the EZConfig-Scanning Setup.exe file. Select Extract All.

9.Go to the EZConfig-Scanningfolder that has been created on your desktop and double click on the EZConfig-Scanning Setup.exe file.

10.Follow the screen prompts to install the EZConfig-Scanning program.

11.If you’ve selected the defaults during installation, you can click on the shortcut on your desktop to start EZConfig for Scanning.

Once the software is installed, you may delete the zip file and the EZCon- fig-Scanning folder from your desktop.

8 - 3