Honeywell 1250gAP CRC, * None, Disable, * Enable, LRC Starts on 1st Character, LRC Starts on 2nd Character

Function Code Transmit

When this selection is enabled and function codes are contained within the scanned data, the scanner transmits the function code to the terminal. Charts of these function codes are provided in Supported Interface Keys starting on page 7-2. When the scanner is in keyboard wedge mode, the scan code is converted to a key code before it is transmitted. Default = Enable.

* EnableDisable

Communication Check Character

To enhance security, you can specify the transmission type of a check charac- ter; either LRC where the calculation starts on the first transmitted character, LRC where the calculation starts on the second transmitted character, or CRC.

Note: This option adds a check character to the bar code data for all symbologies. If you need to enable or disable check characters for individual symbologies, see Symbologies beginning on page 6-1.

Scan the bar code below to set the communication check character type.

Default = None.

* NoneLRC Starts on 1st CharacterLRC Starts on 2nd CharacterCRC

4 - 6