If the bar code is highly reflective (e.g., laminated), you may need to tilt the scanner at an angle so the bar code can be scanned.
Standard Product Defaults
The following bar code resets all standard product default settings.
Standard Product Defaults
Note: PDF and 2D bar codes can only be read by Voyager model 1450g2D and cannot be read by model 1450g1D.
RS485 Interface
The RS485 interface defaults to port 5B. If you have an IBM POS terminal using port 9B, scan the appropriate code below to program the terminal, then power cycle the cash register.
IBM Port 9B
Interface
IBM Port 9B
Interface
Note: For additional RS485 interface selections, see the User’s Guide for your product at our website, www.honeywellaidc.com.