Reading Techniques
The view finder projects an aiming beam that should be centered over the barcode, but can be positioned in any direction for a good read.
Hold the scanner over the barcode,
pull the trigger, and center the aiming beam on the barcode.
The aiming beam is smaller when the scanner is closer to the code and larger when it is farther from the code. Hold the scanner close to smaller barcodes, and farther away from large barcodes to get a proper read.
If the barcode is highly reflective (e.g., laminated), you may need to tilt the scanner at an angle so the barcode can be scanned.
Standard Product Defaults
The following barcode resets all standard product default settings.
Standard Product Defaults
3
