Models 50150, 50200, 50250, 50300 Series (continued)
When your
Note: We do not recommend operating the air purifier without the carbon
Reset Filter Indicator/Turn Light Off:
Models 50150, 50200, 50250, 50300 Series
To Reset Filter Indicator
•Once the filter has been checked and cleaned or replaced as needed, the filter indicator will need to be reset.
•With the unit powered on, press and hold the appropriate filter indicator button down for approximately 10 seconds until the light turns off (Fig. 1).
Fig 1
I
II
III 0
HEPA FILTER
EFILTE | R |
PR |
|
Removing/Changing the Filters
CAUTION: DISCONNECT FROM POWER SUPPLY BEFORE SERVICING
Do not attempt to wash either the carbon
The only two parts requiring any service are the carbon
Fig. 2
Fig. 3
Fig. 4
Step 1: Turn the air purifier off and unplug from the wall outlet.
Step 2: To open, gently place the air purifier on its side and unscrew the locking mechanism located on the bottom of the unit (Fig. 2).
Step 3: Remove the base assembly from the air purifier.
5