![](/images/backgrounds/159955/159955-7037x1.png)
5
Using the UHF RFID Reader
Overview
The Optimus 5900 RFID terminal houses a UHF RFID reader that allows you to read multiple/single RFID tags and read/write/lock/kill the memory of single tags
From the Today screen, select Programs > Demos > RFID Demo. The following screen appears in approximately 2 seconds.
All | Tags that are read are displayed in the order in which they are read. The last read tag |
| displays at the top of the list. A maximum of 128 tags display at a time. The same tag’s |
| UID may appear several times. |
|
|
Accumulated | Tags display on the basis of their UID. If the UID of the tag does not exist, a new |
| registration is carried out. The tag’s UID appears only once. The order of the tags |
| appears in the |
|
|
Sound | The terminal beeps whenever a tag is read. Adjust the volume of the beep by changing |
| the setting in Control Panel > Volume & Sounds. |
|
|
Continue | If the Accumulated tab is selected, you may check the Continue box. If the box is not |
| checked, sound is generated only when a new tag is read except UID tags in the existing |
| list; thereby increasing the tag count. |
|
|
Read | Selecting Read causes the terminal to read tags. This action is the same as pressing |
| and holding the trigger. |
|
|
Read/Write | Selecting Read/Write opens the Read/Write Memory window. (See Reading Tags on |
| |
|
|
Lock/Kill | Lock prevents reading of or writing to a tag. Kill makes a tag permanently undetectable. |
| (See Tag Lock/Kill on page |
|
|
Tag’s count | If All is selected, the tag count is the number of tags with different UIDs. If Accumulated is |
| selected, the tag count equals the number of tags in the list. |
|
|
Stop | Stops the terminal from reading RFID tags. |
|
|
5 - 1