Step 2. Charge the Batteries

Dolphin 6100s ship with both the main battery pack and internal backup battery significantly discharged of power. Charge the main battery pack with the Dolphin charging cable until the LED turns green (red while charging). The average charge time for a fully depleted main battery is

5 1/2 hours. It takes less time if the battery has some charge.1.Attach the appropriate plug adapter to the plug of the power cable.*2.Insert the plug into the appropriate power source.

3.Plug the Dolphin power cable into the DC Power Jack (see page 3-11)on the bottom end of the unit.

Note: If you remove the battery pack or it completely discharges, there is a 30 minute window in which to insert a charged battery pack before the backup battery completely discharges. If your backup battery completely discharges, the contents of the RAM memory will be lost. If your backup battery is less than fully charged, there is a proportionally smaller window of time available.

1

2

3

LED Indicators

Red LED On

Charging

 

 

Green LED On

Battery is fully charged

 

 

*This power cable can also be used to power the Dolphin 6100 while in the Dolphin HomeBase/ eBase Device (see page 10-1).

! We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non - Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.

! Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty.

2 - 2