Honeywell 6100 My ISP, My Work Network, Tasks, Connections Manager, To Access the Connections Manager, Tap > Settings > Connections > Connections

Connections Manager

Microsoft’s Connections Manager sets up multiple network connections to Internet Service Providers (ISPs) via external modem.

Do NOT enter connection parameters in the Connections Manager if:

•you are using one of the on-board wireless radios to connect to a network. The Dolphin terminal uses the settings from each radio’s configuration utility to connect. The connections manager is used primarily to setup WAN modem dial up connections.

•you are using Wireless Zero Config. By default, WZC is disabled on Dolphin terminals.

To Access the Connections Manager

Tap > Settings > Connections > Connections .

Tasks

The Tasks screen enables you to initially configure, and then manage network settings when using a modem. Select an item in this list and then complete the setup screens that follow with the appropriate information for your network.

My ISP

The links under this heading enables you to add and manage modem connections to an ISP. To complete the setup screens, obtain the following information from your ISP:

•ISP dial-up access telephone number

•Username

•Password

•TCP/IP settings

My Work Network

These links enable you to establish the following connections types:

•Modem

•Virtual Private Network (VPN)

8 - 4