Manuals / Brands / Computer Equipment / Laptop / Honeywell / Computer Equipment / Laptop

Honeywell 6100 Free, Card, 3-9), Power, In use, Storage, Battery Tab, Advanced Tab, Storage Card Screen, Technical Assistance, Installing Memory Cards

1 112

Download 112 pages, 4.49 Mb

Storage Card Screen

This screen displays the current capacity and usage statistics of the selected memory type: Storage Card.

Total storage card memory = The total MB of memory capacity of Storage Card.

In use = The MB currently being used.

Free = The MB that is still available for use.

Storage Card—You can install one memory card in Dolphin terminals (see Installing Memory Cards on page 3-9). If a storage card is installed in the terminal, you can see capacity and usage statistics for the card. Data stored on the SD card is not affected when the operating system is upgraded. Autoinstall programs, for example, are stored in \\Honeywell\Autoinstall so that they are always installed after an operating system upgrade or factory reset. Contact a Honeywell technical support representative for more information on how to perform a factory reset. For contact information, see Technical Assistance on page 13-1.

Power

Power system settings contains four tabs: Battery, Advanced, CPU Power Setting, and Wakeup Source.

Tap > Settings > System > Power.Battery Tab

The battery tab displays the power level status of the main battery and the status of the backup battery.

You may also turn on/off the capability to charge the main battery using the USB cable.

Note: The Backup Battery gauge registers either 0% or 100%. The percentage is not an indication of the level of charge remaining on the backup battery. An installed and functional battery registers 100%. A total discharge or a battery error registers 0%.

Advanced Tab

7 - 12

Contents

Page Disclaimer Trademarks Other Trademarks Patents Chapter 1 - Agency Approvals Chapter 2 - Getting Started Chapter 3 - Terminal Hardware Overview Chapter 4 - Using the Keypad Chapter 5 - Using the Image Engine Chapter 6 - Using the Laser Engine Chapter 7 - System Settings Chapter 8 - Communication Chapter 9 - Working with the Bluetooth Radio Chapter 10 - Dolphin HomeBase/eBase Device Chapter 11 - Dolphin QuadCharger Device Page Agency Approvals Safety & RF Approvals by Country: R&TTE Compliance Statement—802.11b/gand/or Bluetooth Laser Safety Label Laser Eye Safety Statement: This device has been tested in accordance with LED Safety Statement CB Scheme Certified to CB Scheme IEC This device and its antenna must not be CAUTION Canadian Compliance For European Community Users Waste Electrical and Electronic Equipment Information Getting Started Step 2. Charge the Batteries 5 1/2 hours. It takes less time if the battery has some charge 1.Attach the appropriate plug adapter to the plug of the power cable 2.Insert the plug into the appropriate power source Plug the Dolphin power cable into the Step 3. Boot the Terminal Step 4. Set the Time Zone, Time, and Date Home Screen Title Bar Horizontal Scroll Indicator Meaning Tile Bar The Tile bar is located at the bottom of application windows Pop-UpMenus Tap anywhere outside the menu to close the menu without performing an action Selecting Programs File Explorer 1. Tap > File Explorer Tap the Cut Page Terminal Hardware Overview Front Panel Features Scan/Decode LED The LED lights red when you press the Scan trigger in scanning applications The LED lights green when a scanned bar code is successfully decoded The LED lights red while the main battery is charging Using Screen Protectors Removing the Screen Protector Press the red Blue 3.Wipe the screen with a clean, non-abrasive, lint-freecloth Installing Your Screen Protector Page Page Settings System Screen Align Screen Recalibrate Back Panel Features Hand Strap Finger Saddle Installed Battery Speaker Left Side Panel Features Side Button > System > Settings > Program Buttons Side Door The rubber door on the left side panel provides access to the Micro SD slot Right Side Panel Features Headset Jack Top Panel Features Imager or Laser Aperture Window Bottom Panel Features I/O Connector Dolphin Peripherals/Accessories for the Dolphin Dolphin HomeBase™ Device Dolphin eBase™ Device Dolphin QuadCharger™ Device USB Communication Cable for the Dolphin Li-IonBattery Packs Changing the Main Battery Pack Checking Battery Power Guidelines for Battery Pack Use and Disposal Charging Charging Guidelines The desktop appears when the Soft Reset is complete Hard Reset (Cold Boot) \\Honeywell\AutoInstall folder Suspend Mode Troubleshooting Suspend/Resume Dolphin 6100 Technical Specifications 60825-1:1993+A1:1997+A2:2001 Using the Keypad Basic Keys Name Function ALPHA Backspace Function Key Combinations below Key Combination FUNC + FUNC + SP CTRL Key Combinations Program Buttons Using the Image Engine Symbology Type Symbology Name 1D Symbologies 2D Symbologies Composite Codes Activating the Engine Scan Using Demos To access these demos, tap > Demos •Select Scan Demo to verify decoding, or Omni-DirectionalScanning Positions Capturing Images (5300 Engine only) Image Preview File Formats File Size High-VisAiming Pattern Page Using the Laser Engine > Demos • Select Scan Demo to verify decoding, or Decoding a Bar Code Project the aiming beam by pressing and holding the Sample Bar Code System Settings Clock & Alarms Tap > Settings > Clock & Alarms Personal Menu Settings > Personal Buttons Owner Information Changing Button Assignments Available Applications Additional Functions Using File Explorer Navigate to the Windows folder and open the Start Menu My Device > Windows > Start Menu > Programs Paste Shortcut Paste Shortcut 4.Tap to verify that the program now appears on the Start menu System Menu See Page About Backlight Certificates External GPS Managed Programs Program Tap > Settings > System > Backlight On Battery On External Turn off backlight: Turn on backlight: Encryption Error Reporting External GPS Managed Programs It lets system administrators: Memory Main Screen Storage Card Screen Total storage card memory = The total MB of memory capacity of Storage Card In use Free Storage On battery power On external power CPU Power Setting Tab Wakeup Source Regional Settings Remove Programs \\Honeywell\Autoinstall Remove Programs Resetting the Terminal Remove Yes Screen General Screen Orientation Align Screen ClearType Screen Text Size Screen Smallest Largest Task Manager Using the Task Manager Communication Page Connections Menu Tapping this icon… Dolphin Manages the wireless radios installed in the terminal. See Dolphin Wireless My ISP My Work Network Modify an Existing Connection Dolphin Wireless Manager Dolphin Wireless Manager Window Enabling the Radios OFF Accessing Radio Configuration Utilities WLAN Settings Bluetooth Settings Network Cards Edit Connecting and Synchronizing the Terminal and Workstation Microsoft Web site Capabilities ActiveSync Windows Mobile Device Center Connect the terminal to the workstation via a Dolphin communication peripheral If the File is an Installer (*.exe or *.setup.exe) On the workstation If the File is Not an Installer a.Open ActiveSync and click Explore, or Connecting the Terminal to a Wireless Network WLAN (802.11b/g) WLAN Radio Honeywell Secure Wireless (SWC) Client User’s Guide www.honey- wellaidc.com Page Working with the Bluetooth Radio Pairing and Trusted Devices Connecting to Other Bluetooth Devices > Settings > Bluetooth Add new device 4.Select a device from the list and tap Next 5.You are prompted to enter a passcode If the device has a specific passcode, enter it in the Passcode If the device does not have a specific passcode, enter one in the Save Transferring Files 1.Tap > File Explorer Beam File 4.The Bluetooth radio begins searching for devices 5.Tap the device to begin sending the selected file 6.While trying to connect, the selected device reads “Pending” 7.When the file is being transferred, the selected device reads “Sending” Making the Terminal Discoverable Mode Select Make this device visible to other devices and tap OK Dolphin HomeBase/eBase Device Front Panel Terminal Well Rubber Feet Back Panel USB Port Serial Port Ethernet Port (eBase only) Powering the Dolphin HomeBase Device eBase Clamp-onFerrite Core Installation Charging the Main Battery Inserting a Terminal Install the Main Battery 2. Power the base; see Powering the Dolphin HomeBase Device on page 3.Slide the terminal into the terminal well making certain Charging a Spare Battery Checking Battery Power Settings > Power Structural Dimensions Weight Material Color Page Dolphin QuadCharger Device Charging Batteries Recommendations for Storing Batteries Troubleshooting Page Dolphin 6100 Net Base Device Parts and Functions Front Panel Terminal Wells Power/DOCK LED This color Back Panel RJ45 Ethernet Ports Each Ethernet port has a dedicated green and yellow status LED Bottom Panel For details on how to mount the Net Base, see Mounting the Net Base on page Power Only Connecting Power to the Net Base Applications on the Dolphin Terminal Displaying the Net Base Terminal Well and Dolphin IP Address Desk Mounting Hardware Required Installing the DIN Rail Wall Mounting Hardware (Provided) Hollow Wall Installation Wood Stud Installation Securing the Base to the Wall Bracket Page Page Customer Support Limited Warranty Duration How to Extend Your Warranty Page Honeywell Scanning & Mobility