SETTING UP THE WINE CHILLER
UNPACKING
Remove all packing materials and accessories. Examine the chiller for any damage such as dents or broken door. Do not install if chiller is damaged.
Allow the chiller to stand upright for approximately 2 hours before connecting the power source.
If discarding an old chiller, please see “Disposal Instructions” on page 3.
PLACING THE WIRE RACKS IN THE CHILLER
Carefully place the racks in the appropriate grooves. Notice the racks slide in and out easily, so do not pull them out completely when in use.
LOCATION OF THE CHILLER
Find a suitable area for your wine chiller. Do not place the chiller outside, or any other place where the chiller will be exposed to water or other harsh weather conditions. The chiller must not be placed in environments where the ambient temperature drops below 65°F (18.3°C) degrees or goes above 85°F (29.4°C) degrees. The ideal ambient temperature is 72°F (22.2°C).
INSTALLATION INSTRUCTIONS
The wine chiller is a free standing appliance, but can be installed next to counters and walls – but must not be placed under a counter.
For the chiller to function properly, it is important to have a clearance of at least 10 centimeters from the back of the chiller to any surface next to it. Also, there needs to be a clearance of at least 5 centimeters from the sides of the chiller next to it.
10 cm | wall |
|
|
| |
back |
| 5 cm |
|
| |
Top of |
|
|
the chiller |
| |
front |
|
|
NOTE: THE SPACING IS NECESSARY FOR PROPER VENTILATION
6