10 Universal Vehicle Power Supply Installation Instructions
3Slide the positive fuse link terminal ring from the input
power cable onto positive battery clamp bolt.
4Place another 3/8-inch washer onto the battery clamp.
5Thread another 3/8-inch nut onto the battery clamp bolt
and tighten the nut securely.
6Repeat Steps 1 through 5 for the negative wire.
7Connect the ground wire. For help, see “Fasten the
Ground Wire” on page11.
Connect to the Side Battery TerminalWhen you remove the battery terminal side post bolts from
the vehicle battery, the vehicle computer and radio return to
their default settings.
1Remove positive battery terminal side post bolt from the
vehicle battery.
2Fasten a 3/8-inch nut to the 3/8 x 1-1/2-inch positive
battery terminal post.
3Place a 3/8-inch washer on the battery terminal post.
4Slide the positive wire fuse link terminal ring from the
power input cable onto the positive battery post.
Negative wire
(green and white)
Washers
Nut
Positive battery
terminal post
Ground
wire (black)