6 Universal Vehicle Power Supply Installation Instructions
Install the CV31 Ignition Sensing
Cable (Optional)
Install the CV31 ignition sensing cable to automatically turn
on the CV31 when the operator turns on the vehicle.
1Connect the ignition (blue) wire to the ignition circuitry of
the vehicle (up to 60 V).
2Connect the grounding (black) wire to the vehicle chassis
for electrostatic discharge (ESD) protection. If the vehicle
chassis is not a suitable ground, connect the wire to the
negative terminal of the power source.
3Connect adapter cable P/N VE027-8024-C0 to the
ignition sensing cable, and then connect the ignition
sensing cable to the CV31.