8 Universal Vehicle Power Supply Installation Instructions
4Install heat shrink tubing on the battery cable jacket.
5Insert and secure the fuse in the fuse holder assembly.
6Assemble the negative wire:
aStrip 0.60 cm (0.25 in) of insulation from the green
and white wires.
bTwist the wires together.
cCrimp a 3/8-inch terminal ring onto the wires.
7Assemble the positive wire:
aCut a strip of red wire that is 5.08 cm (2 in) long.
bStrip 0.60 cm (0.25 in) of insulation from the red and
black wires.
cTwist the wires together.
dCrimp the fuse block assembly to the wires.
eCrimp the red wire you cut to the other end of the fuse
block assembly.
8Install heat shrink tubing on the braided ground wire.
Battery cable
jacket
Ground wire
Heat shrink
tubing
Heat shrink
tubing
Green wire
White wire
Terminal ring
Fuse
Red wire
Black wire