7.Unlock the access door to the socket by sliding the door toward the IrDA port side of the terminal.
Note: Do not insert sharp objects into the SIM door slot. Inserting sharp objects may damage sensitive electronic components.
8.Lift the door to expose the socket.
9.Insert the SIM card into the socket.
Note: Make sure the interface on the card is connected to the SIM Card interface in the socket; align the beveled corner of the card with the beveled corner of the socket.
10.Close and lock the access door.
11.Close the protective door over the memory socket. Insert and tighten the T6 TORX screw to secure the door closed.
12.Install the battery and the battery door. Reattach the hand strap to the terminal (99EX models only).
13.Press the Power key or the SCAN key to wake the terminal.
Step 7
Step 8
Step 9
Step 10
19