Honeywell 99EX, 99GX Using the Scan Image Engine, 1.Tap > Demos > Scan Demo

Using the Scan Image Engine

1.Tap > Demos > Scan Demo

2.Point the Dolphin’s terminal at the bar code.

99EX Models

99GX Models

3.Project the aiming beam or pattern by pressing and holding one of the following:

•the trigger (99GX models only),

•the SCAN key (all models) or

•one of the terminal’s side buttons (all models).

4.The red LED lights.

5.Center the aiming beam over the bar code; see Aiming Options on page 21.

6.When the bar code is successfully decoded, the LED changes to green and the terminal beeps.

7.The bar code information is entered into the application in use.

20