Honeywell 99EX, 99GX Removing the Main Battery Pack, Battery Error Notification, Battery Pack Use and Disposal

Removing the Main Battery Pack

When removing a battery from the terminal, put the device in Suspend Mode (see page 9) before removing the battery door. Once the battery door is removed, wait at least 3 seconds before removing the main battery. This process allows the device to shut down properly and to maintain memory during the battery swap.

Battery Error Notification

If your terminal displays the following indicators, replace the battery with a new Honeywell battery pack.

• appears in the Title bar at the top of the touch panel display.

•The General Notification LED flashes red.

•A notification appears on the Tile bar at the bottom of the touch panel display.

Battery Pack Use and Disposal

The following are general guidelines for the safe use and disposal of batteries:

•Do not disassemble or open, crush, bend or deform, puncture or shred.

•Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard.

•Improper battery use may result in a fire, explosion or other hazard.

7