Honeywell F118 Mount Air Cleaner Cabinet, Mounting procedure, Equipment Falling Hazard

F118 IN-CEILING MEDIA AIR CLEANER

1

1

SUSPENDED￿ CEILING

STRUCTURAL CEILING
PLACE WIRE SUPPORTS AS CLOSE AS POSSIBLE ￿
TO F118 SUPPORT SHOULDER POSITIONS, ￿
APPROXIMATELY 5 IN. (127 MM) FROM ENDS.	1
2

F118

1

DROP￿

CEILING

T-BAR/DROP CEILING SUPPORT SYSTEM

24 IN.￿	24 IN.￿
(610 MM)	(610 MM)

24 IN.￿

(610 MM)

REMOVE ￿

T-BAR TO CREATE ￿ 48 X 24 IN.￿

(1219 X 610 MM) SPACE.

SUPPORT SHOULDER ￿

LOCATIONS (8)

BEND TABS TO ￿

HOLD MOUNT ￿

ON AIR CLEANER

SUPPORT ￿ SHOULDER￿ (1 OF 8)

SUPPORT SHOULDER￿

POSITIONS

1BE SURE TO TWIST THE SUPPORT WIRE A MIINIMUM ￿ OF FOUR TIMES TO PROPERLY BEAR WEIGHT.

2THERE MUST BE 12 IN. (305 MM) BETWEEN DROP￿

CEILING AND STRUCTURAL CEILING.

REINFORCED￿ T-BAR

M16212A

Fig. 4. Mounting procedure.

Mount Air Cleaner Cabinet

WARNING

Fire or Electric Shock Hazard.

Can cause personal injury or equipment damage. Do not connect the power source until after electronic air cleaner is mounted.

1.The cabinet has multiple slots. See Fig. 4. Insert the support shoulders into the selected slots.

2.Bend the two tabs on each support shoulder until the tabs are flush with the cabinet.

3.Thread wire through the support shoulders. Make sure the wire is strong enough to support the total weight of the air cleaner. Never rest the air cleaner on the T-bar unless it has been reinforced to hold the weight.

4.Twist the support wire a minimum of four times.

WARNING

Equipment Falling Hazard.

Can cause personal injury, structural weakening, buckling, or damage to equipment.

Be sure platform is stable and can support combined weight of installer and equipment.

Use assistant to help support equipment during instal- lation.

5 68-0209-2 Revised 11-07