Honeywell F52F Getting The Most From Your Air Cleaner, Run the air, cleaner as much, as possible

GETTING THE MOST FROM YOUR AIR CLEANER

Run the air	For greatest efficiency, the air cleaner should
cleaner as much	run all the time. To do this, set the fan switch on
as possible	your thermostat to ON, and make sure the air
	cleaner is switched on. The fan and air cleaner
	will run even when the furnace or air conditioner
	is off. Note: A manual fan switch may be built
	into the furnace fan controller.
	The air cleaner itself uses less power than a
	40 watt light bulb (two-cell model—33 watts;
	single-cell model—22 watts). You will also have
	the cost of running the system fan to consider.
	Generally the added cost is more than offset by
	the added benefits of full time air cleaning and
	improved air circulation. Some people feel that
	room temperatures stay more even when the
	fan is always on.
	Even if your thermostat does not have a fan ON
	position, you can obtain maximum available air
	cleaning benefit by making sure the air cleaner
	is always switched on so it operates whenever
Keep the cell(s)	the furnace or air conditioner is on.
and prefilter clean	Although the air cleaner is designed to be
	efficient over a wide range of cell loading
	conditions, regular cleaning is your best
	assurance of consistent performance. Also, a
	very dirty cell and prefilter reduces air flow and,
	in turn, this reduces the efficiency of the furnace
	or air conditioner.

5 69-0419—2