Mounting the Camera
Mounting points are provided on the top of the camera for mounting the camera on a bracket or tripod. They are designed to accept standard sized 1/4 x 20 mounting screws. This bracket can be unscrewed and mounted onto the opposite side of the camera, depending on your application. The mounting bracket must be capable of supporting the weight of the camera and its lens.
Note Some installation codes dictate that the mounting bracket must be capable of supporting up to four times the combined weight of the camera and lens.
Figure 5 Camera Mount
English
Unscrew 3 bracket securing screws and then resecure the bracket on the other side of the camera.
Connecting the Camera
Note Check the power source from the external power supply before applying power to the camera.
1.Connect the VIDEO connector on the rear of the camera to the
2.Connect the camera to a power supply appropriate for your installation.
HCD484L, HCD484LX:12 VDC or 24 VAC power supply
HCD485LX: 230V power supply
Rev 2 | 6 | |
|
| 02/07 |