Press MENU briefly to confirm the current operation setup. The information (see Figure 8) disappears after a few seconds if there is no button action.
Even though the OSD message disappears, the Camera ID or Title continues to display, if selected in the CAMERA ID
•With external communication, change the display position. Options are
Bottom right, bottom left, top left, top right,
•If you do not need to display the Operating OSD (for example, for an external text overlay board), set it to OFF at all times through a remote control using an RS485 connection.
Figure 8 OSD Information Display
English
CAMERA ID/TITLE
Back Light | Shutter Speed | WB Mode |
Back Light displays if BLC is enabled (see BLC MODE (Backlight Compensation).
Shutter Speed displays if the default shutter speed is changed.
WB Mode always displays.
Rev 2 | 8 | |
|
| 02/07 |