OSD Menu Functions
Use the OSD menu controls to program the camera.
1.Press and hold the MENU (center) button for 2 seconds to display the Setup menu.
2.Press the UP or DOWN buttons to select a menu item.
3.Press the MENU button to enter the selected submenu.
4.Press the + or – buttons to increase/decrease the value of the selected item.
Figure 9 OSD Menu Controls
UP
MENU
+
DOWN
Saving your Settings
First Method: When you are satisfied with your settings:
1.Press MENU for two seconds. The SETUP MENU is replaced by one of two messages:
SAVE? displays when values have been changed. Selecting SAVE exits Setup mode and saves your changes.
QUIT? displays when you have not changed any settings. Selecting QUIT exits Setup mode without saving any changed values.
2.Press + or – to select SAVE or QUIT and then press MENU to exit the Setup mode. Press UP or DOWN to cancel the SAVE/QUIT and return to the SETUP MENU.
Second Method: Select EXIT MENU on the SETUP MENU, press MENU, and then select SAVE AND EXIT to save the changed settings and exit the menu. Select EXIT to exit without saving the settings.
Rev 2 | 9 | |
|
| 02/07 |