Honeywell HD3MDIP, HD3MDIPX Mounting the Camera, Surface Mount

Installation and Setup

Mounting the Camera

Surface Mount

1.Secure the skirt to the ceiling or wall using the appropriate screws (supplied).

2.Connect the wires (see Connecting the Wires on page 19).

3.Rotate and align the camera assembly yellow label with the skirt yellow label.

4.Secure the camera assembly to the skirt by pushing it into the skirt, then twisting it clockwise until it clicks securely in place.

5.Secure the camera assembly to the skirt by twisting it clockwise until it clicks securely in place.

6.Adjust the camera’s field of view (see Adjusting the Camera FOV (Field of View) on page 25).

7.Install the turret by clicking it into place.

Skirt

Screws (supplied)

Camera assembly

Turret

Bubble

8.Install the bubble by placing it on the camera with the tabs to the left of the slots, then turning it clockwise until the tabs click securely into place.

24