Honeywell HEGS5000, HEGS5001 Record Activate recording on VCR.

6.4 VCR CONTROL
The HEGS5001 controller sends basic commands to the VCR. Refer to the VCR User
Manual for details on the operation of the VCR.
To lock the controller into the VCR mode, press the VCR ( ) button twice. The
LED lights to indicate that the controller is now in the VCR mode.
Use the joystick and keys 7-14 as described in Section 2.1 to control the VCR. To select
a different VCR, use the Monitor ( ) key or Press + or – to move between VCRs.
Example: To select VCR 2, press Monitor ( ) 2 Enter ( ) or 2 Monitor ( ).
To exit the VCR mode, press VCR ( ).
ICON KEY DESCRIPTION
VCR Places the controller into the VCR mode. Press once to
send a single command (LED will flash). Press twice to
lock in VCR mode (LED will stay lit).
Joystick The LEFT, RIGHT, UP, and DOWN directions of the
joystick mimic the VCR tape controls
UP = Play
DOWN = Stop
RIGHT = Frame Advance
LEFT = Frame Rewind
Rewind Twist the joystick knob COUNTERCLOCKWISE to
REWIND.
Fast-Forward Twist the joystick knob CLOCKWISE to FAST-FORWARD
Reverse Play Play tape in reverse at regular speed.
Pause Pause tape playback.
000
Counter Reset Reset VCR counter.
123
Counter Memory
Stop
Stop VCR counter to mark location for memory.
Index Search Allows an index number to be searched for both the
forward or reverse directions.
Time and Date
Search
Allows an exact time and date to be searched for both
the forward and reverse directions.
Time Mode Allows the time mode of the VCR to be selected when
logged in as a Master user.
• Record Activate recording on VCR.
Rev. 1.01 47 900.0800
19-Jun-06