Honeywell HW-500C Series Operation, outlet, To turn fan on, press the ON/SPEED/OFF, or Celsius

OPERATION

•Plug the power cord into a 120 Volt AC wall

outlet.
• To turn fan on, press the ON/SPEED/OFF	On•Speed•	H
	Off	M
button one time. You will see either an “F”
		L
or “C” flash quickly indicating Fahrenheit		Timer	Temp Set•
or Celsius.
			Manual

•When fan is on, it will start in High speed. Press button again while on High speed and

fan will switch to Medium. While on Medium, press “SPEED” button and fan will switch to Low speed.

•You will see a red light illuminated on the control panel of the fan showing you what speed your fan is on.

•Select either Intake ( ) for fresh air or Exhaust ( ) to remove stale air from the room. A red light will illuminate on the mode selected.

•To turn the fan off, press the ON/SPEED/OFF through the speed cycles. NOTE: Once your fan is “OFF”, the next time you turn it on, it will automatically default to HIGH speed. You can then adjust the speed as desired.

THERMOSTAT OPERATION

This fan has an LED display indicating the desired room temperature setting.

Pressing the arrow key up ( ) will set the fan to have a warmer room temperature setting. Pressing the down arrow button ( ) will change the desired room temperature setting to a cooler level.

When the fan is in operation, it will cycle on or off to maintain the desired comfort setting.

ROTATING GRILLE FEATURE

The Rotating Grille feature allows the grilles on the fan to rotate, providing wider air distribution to help cool your room.

•To activate, turn the hub in the center of each grille1/4 turn to the right (Fig. 3). Now when you use your fan in any speed the grilles will rotate, expanding air circulation.

•To stop grille rotation, turn the center hub 1/4 turn counter-clockwise to the left.

Fig. 3	On Speed
	Off
	Timer	Temp Set
		Manual